How to Clean Exposed Aggregate Driveways Like a Professional
Exposed aggregate driveways are popular in Caloundra, QLD, for their textured appearance and durability. However, the spaces between exposed stones can collect dirt, organic growth and vehicle fluids. Coastal exposure, humid weather and shaded areas can make regular cleaning particularly important.
Professional-quality cleaning depends on using the right cleaner, controlled water pressure and effective wastewater management. Excessive pressure or harsh chemicals can damage the cement around the stones, affect existing sealers and leave permanent marks.
Inspect the Driveway Before Cleaning
Start by checking for cracks, loose aggregate, crumbling cement and peeling sealer. Cleaning cannot repair these defects, and pressure washing may make them worse. If the concrete is newly installed, follow the installer’s curing and cleaning instructions before applying chemicals or pressure.
Identify whether the surface is sealed and, where possible, confirm the sealer type. Some cleaners can discolour or soften coatings. Always test your proposed cleaning method on a small, inconspicuous area and let it dry before assessing the result.
Choose Suitable Equipment and Cleaning Products
- A stiff nylon broom and plastic scraper for loose debris and surface deposits.
- A concrete-compatible detergent suitable for exposed aggregate and any existing sealer.
- A purpose-made concrete degreaser for oil and grease stains.
- A pressure cleaner with adjustable pressure and a wide-angle fan nozzle.
- Enclosed, slip-resistant footwear, eye protection and chemical-resistant gloves appropriate to the cleaner.
- Runoff-control equipment, such as containment berms and a wet vacuum suitable for the wastewater.
Avoid wire brushes, which can scratch surfaces or leave metal particles that rust. Do not use hydrochloric acid as a general driveway cleaner: it attacks cement paste and can alter the appearance of exposed aggregate. Never mix cleaning chemicals, particularly chlorine-based products with acids or ammonia.
How to Clean an Exposed Aggregate Driveway
- Clear and sweep the area. Move vehicles, pots and outdoor items. Sweep up sand, leaves and loose dirt rather than washing them into the street.
- Plan runoff control. Identify the driveway’s slope and nearby stormwater inlets. Contain wash water before applying detergent or starting the pressure cleaner.
- Treat individual stains. Apply an appropriate concrete degreaser to oil marks, following the label’s dilution and dwell-time instructions. Agitate gently with a nylon brush and do not let the product dry.
- Apply the general cleaner. Pre-wet the concrete if the product instructions require it. Work in manageable sections, allowing the cleaner time to loosen grime without drying on the surface.
- Wash using controlled pressure. Start at a low setting with a wide fan nozzle approximately 30–50 cm from the surface. Test first, then adjust cautiously. Keep the nozzle moving with consistent, overlapping passes.
- Rinse and recover wastewater. Remove cleaner residue using clean water while maintaining containment. Collect wastewater and arrange disposal through an appropriate, approved pathway.
- Inspect after drying. Check for remaining stains, loose stones or sealer damage. Repeat targeted treatment rather than increasing pressure across the entire driveway.
Use Pressure Without Damaging the Aggregate
There is no single safe pressure setting for every exposed aggregate driveway. Concrete condition, nozzle type, water flow, working distance and sealer condition all influence the result. Follow the surface and equipment manufacturers’ guidance rather than choosing a setting based only on the machine’s maximum pressure.

Avoid concentrated pencil jets and aggressive turbo nozzles unless a suitably experienced operator has assessed the surface. Stop immediately if stones loosen or the cement between them begins to erode. A compatible rotary surface cleaner can improve consistency, but incorrect pressure or technique can still leave rings and damage.
Remove Common Driveway Stains Correctly
Oil and Grease
For fresh spills, apply a suitable absorbent promptly, then collect it for appropriate disposal. Treat remaining residue with a concrete-compatible degreaser. Older oil stains may need repeated applications or a specialist poultice, and complete removal is not always possible.
Algae, Mould and Organic Growth
Shaded driveways in Caloundra can develop slippery organic growth. Use a product labelled for the surface and purpose, observing its safety, dwell-time and rinsing directions. Protect nearby plants and keep children and pets away until the area is safe to access.

Rust and Persistent Discolouration
Choose a rust remover specifically compatible with concrete, the exposed stone and any sealer. General-purpose acidic cleaners may etch the cement or affect some aggregates. Persistent white deposits or unexplained discolouration warrant assessment before further https://blogfreely.net/coenwiwtqq/should-you-seal-your-concrete-after-pressure-cleaning chemical treatment.
Protect Caloundra’s Stormwater System
Do not allow detergent, oil, sediment or contaminated wash water to enter gutters or stormwater drains. Stormwater generally flows to local waterways without sewage treatment. Even cleaning without detergent can produce contaminated runoff.
Check current Sunshine Coast Council requirements and seek disposal advice where necessary. Do not assume collected wash water can be discharged onto a garden or into the sewer; the appropriate method depends on its contents and applicable requirements.
Maintain the Driveway Between Deep Cleans
Sweep regularly, remove leaf litter and address oil spills quickly. Schedule deeper cleaning according to shade, traffic and visible buildup rather than relying on a fixed timetable. In Caloundra’s warm conditions, choose a cooler part of the day so cleaning products do not dry too quickly.
If resealing is needed, use a product suitable for exposed aggregate and vehicle traffic. The driveway must meet the product’s cleanliness and moisture requirements before application. Consider wet-weather traction, as some sealers can make a textured driveway more slippery.
For widespread organic growth, deteriorating concrete, unknown coatings or difficult runoff containment, engage a local driveway-cleaning professional. Ask how they assess pressure, protect surrounding surfaces and recover wastewater—not simply how powerful their equipment is.
Caloundra Pressure Washing
(07) 4120 7010